Marun-X30G
Marun-X30G
1 product description
X 30 G is a polypropylene homopolymerfor injection moulding.
Because of its good flow properties, this grade offers easy
processing.
Articles produced from X 30 G exhibit high stiffness. X 30 G
is widely used for injection moulding consumer goods such
as food containers, housewares, toys and garden furniture.
Other major applications are components for appliances
and parts for the automotive industry
2 applications
- Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
- ISO test methods are the !ates under the societys current procedures. All specimens are prepared by injection moulding
| PROPERTIES | method | unit | TYPICAL VALUE (a) |
| Physical properties Melt flow rate (230°G, 2.16 kg) Densit |
ISO 1133 ISO 1183 |
Dg / min g/cm3 |
g 0.9 |
| Mechanical properties Flexural modulus Tensile strength at yield Elongation at yield IZOD impact strenghh (notched)at 23°G Hardness Shore D |
ISO 178 ISO R 527 ISO R 527 ISO 180 ISO 868 |
N/mm7 N/mm2 % kJ/m2 Points |
1500 3 13 4 71 |
| Thermal properties Vicat softening point (9.8 N) H.D.T. (0.46 Mpa) Accelerated oven ageing in air (forced circulation) at 150 °C |
ISO 306/A ISO 75/B IS04577 |
oc oc hours |
155 115 360 |
