Marun-F30S
Marun-F30S
1 product description
F 30 S is a medium-high fluidity polypropylene homopolymer.
F 30 S is particularly suitable for the production of heavy
denier staple fibre and continuous filament.
F 30 S exhibits good process stability and constant, high
flow during extrusion.
F 30 S is developed for the extrusion of staple fibres for
spinning wool system fibres for carpets, rugs and garments
such as overalls and socks.
F 30 S is also suited for the production of continuous filament for ropes, belts and straps.
Another typical applications of F 30 S is the extrusion of
decorative ribbons.
2 applications
- Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
- ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding .
| PROPERTIES | method | unit | TYPICAL VALUE (a) |
| Physical properties Melt flow rate (230'C, 2.16 kg) Density |
ISO 1133 ISO 1183 |
dg / min g/cm3 |
12 0.9 |
| Mechanical properties Flexural modulus Tensile strength yield Elongation at yield lzod impact strenghh (notched) at 23°C Hardness Shore D |
ISO 178 ISO R527 ISO R 527 ISO 180 ISO 868 |
N/mm2 N/mm2 % kJ/m2 points |
1550 35 13 3.5 71 |
| Thermal properties Vicat softening point (9.8 N) H.D.T. (0.46 Mpa) Accelerated oven ageing in air (forced circulation) at 150 °C |
ISO 306/A ISO 75/B IS04577 |
oc oc hour |
155 117 360 |
