visionpolymer.ir > Print

ASPC MFI3313

1 product description

MFI3313 is a medium density polyethylene, which has a broad molecular weight distribution and high melt strength. This product specially designed for producing thin films with high tear resistance, good sealability, high strength and high draw down.

2 applications

MFI3313 is recommended for blown film extrusion. This product is suitable for manufacture of high strength carrier bags and high quality thin films for uni/multi-wall packaging.

3 processing

Extruder temperature profile: 180-240°C

Frost line height: 6-8 times die diameter.

Blow Up Ratio: 3-5

Recommended film thickness: 10 to 50 μm.

Please note that, these processing conditions are recommended by producer (for 100% MFI3313 resin, not in the case of blending with any other compatible material) , but because of the many particular factors which are outside our knowledge and control, and may affect the use of product, no warranty is given.

4 features

For more detailed information on handling, storage, safety parameters, refer to relevant SDS of Components.

Property	Value (1)	unit	Test method

Physical Properties	933
Density (23 oC)	933	kg/m3	ISO 1183
MFI (190 oC /2.16Kg)	0.1	dg/min	ISO 1133
MFI (190 oC /21.6Kg)	13	dg/min	ISO 1133
Mechanical properties (2)	620
Tensile Modulus of elasticity	620	MPa	ISO527-1;2
Max. Tensile Strength (MD)	55	MPa	ISO 527-1;3
Max. Tensile Strength (TD)	43	MPa	ISO 527-1;3
Tensile Strain at Break (MD)	600	%	ISO 527-1
Tensile Strain at Break (TD)	600	%	ISO 527-1
Elemendorf tear strength(MD)	330	mN	ISO 6383-2
Elemendorf tear strength(TD)	2000	mN	ISO 6383-2
Failure energy	8.5	J/mm	DIN 53373
Dart Drop Impact	160	g	ASTM D 1709
Thermal Properties	124
Melting Point	124	oC	ISO 3146
Vicat Temp , (A50,50 oC /h , 10 N)	116	oC	ISO 306
Additive : Antioxidant-Heat stabilizer

Notes:

(1)Typical Values: not to be construed as specifications limits.

(2)Properties are based on 20 μm blown film produced at a melt temperature of 220°C and 4 BUR using 100% MFI3313.

Note: this information is based on our current knowledge and experience .in view of many factors that may affect processing and application, this data does not relive processors from the responsibility of carrying out their own tests and experiments, neither does it imply any legally binding assurance of certain properties or of suitability for a specific purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.