Deprecated: Array and string offset access syntax with curly braces is deprecated in /home/visionpo/public_html/engine/classes/templates.class.php on line 165 Deprecated: Array and string offset access syntax with curly braces is deprecated in /home/visionpo/public_html/engine/modules/sitelogin.php on line 101 visionpolymer.ir > Print > ABS-SD0152
Back | Print

ABS-SD0152

ABS-SD0152


1 product description
SD0152 is one of the styrenic terpolymer(ABS)grade with improved toughness versus HIPS grades. SD0152 exhibits,low shrinkage, and good dimensional stability. SD0152 is widely used in general injection molding applications.Use this information as a guide to aid you in selecting the proper resin for your application.
2 applications

furnitures,automotive parts ,general injection molding,appliances casing,office supplies.

3 processing

Drying prior to processing is recommended in a desiccant dehumidifying hopper dryer. An inlet air dew point of -20°F (-29°C) or below is recommended to achieve a moisture content 0.1%. Typical drying conditions are 2 hours at 180° - 190°F (82° - 88°C). Drying for 4 hours at 160° - 170°F (71°-77°C) is also adequate.

PROPERTY

UNIT

TEST METHOD

TYPICAL VALUE

MELT FLOW INDEX

(200°C/5KG)

GR/10MIN

ASTM D-1238

2.4

IZOD IMPACT STRENGTH

KJ/M2

ASTM D-256

23

VICAT SOFTENING POINT(50N LOAD)

ASTM D-1525

99

BULK DENSITY

KG/M3

-

600

TENSILE STRENGTH AT YEILD

KGF/CM2

ASTM D-638

450

TENSILE MODULUS

KGF/CM2

ASTM D-638

21000

ROCKWELL HARDNESS(AT 23°C)

R.SCALE

ASTM D-785

108

*All above mentioned data are typical values and not to be construed as real specifications.Users should confirm results by their own tests.For more information about guaranteed items, please refer to S.S.S.(Standard Sales Specifications)

pic