JAMPILENX30S(510M)
JAMX30S(510M)
1 product description
″Jampilen X30S″ is a homopolymer particularly suited for the extrusion of cast and water quenched blown film.
″Jampilen X30S″ is formulated with a general purpose stabilization package and does not contain any slip or antiblocking agents. ″Jampilen X30S″ exhibits excellent processability and outstanding optical properties.
″Jampilen X30S″ gives an excellent high gloss finish in laminates and exhibits good printability after Corona treatment.
2 applications
- Film for packaging food-stuffs such as pasta, snacks, biscuits, bakery products and confectionery
- Film for packaging for flowers, books, stationery, blankets, shirts, knitwear and hosiery
- Lamination with polyester, polyamide and aluminum for packaging of snacks, crisps, sweets, coffee, meat products and pre-cooked foods
- Small pipes and drinking straws
- Blow moulded pigmented bottles and coextruded sheet
3 processing
- Extrusion (Cast and water quenched blown film) Extrusion (Small pipes)
- Blow moulding
4 features
- Excellent processability
- Good optical properties
- Excellent gloss
- Homopolymer
|
TYPICAL PROPERTIES |
VALUE |
UNIT |
METHOD |
|
Physical |
|||
|
Melt Flow Rate (230 oC, 2.16kg) |
9 |
g/10min |
ISO 1133 |
|
Density |
0.9 |
g/cm3 |
ISO 1183 |
|
Mechanical |
|||
|
Flexural Modulus |
1500 |
N/mm2 |
ISO 178 |
|
Tensile Strength at Yield |
34 |
N/mm2 |
ISO R 527 |
|
Tensile Elongation at Yield |
13 |
% |
ISO R 527 |
|
Izod Impact Strength (notched) at 23 oC |
4 |
kJ/m2 |
ISO 180 |
|
Hardness Shore D |
71 |
points |
ISO 868 |
|
Thermal |
|||
|
Vicat softening point (9.8N) |
155 |
oC |
ISO 306/A |
|
H.D.T. (0.46 Mpa) |
115 |
oC |
ISO 75/B |
|
Accelerated oven ageing in air at 150 oC |
360 |
hours |
ISO 4577 |
|
Optical |
|||
|
Haze |
1 |
% |
MTM 17031 |
|
Gloss |
85 |
% |
MTM 17021 |
