22502AA/ 22502KJ
22502AA/
22502KJ
1 product description
22502 is a LLDPE blown
fi
lm grade designed for applications re-
quiring ease of processing and good optical properties even at low
extrusion temperature. This resin is well suited for blending with
LDPE and for general purpose uses, including agricultural applica-
tions.
2 applications
• General purpose
• ease of processing
• good optical properties
• low extrusion temperature
• suited for blending with LDPE
• agricultural applications
3 processing
• Blown film grade
4 features
• 22502AA:
Thermal Antioxidant
• 22502KJ:
Thermal Antioxidant
Antiblocking agent
Slip Agent
Material properties
(This data are typical values and are not to be construed as product specifications.)
| Resin properties |
Unit |
Typical values | ASTM Method |
| Melt Inex | (g/10) | 0.95 | D 1238 |
| Density | (g/ml) | 0.9220 | D 1505 |
| Film properties @ | |||
| Dart Impact | (g) | ... - 70 | D 1709 |
| Elmendorf Tear | (g) | MD/TD - 130/350 | D 1922 |
|
Tensile strengh at yield |
(MPa) | MD/TD MD / - 12/11.5 | D 882 |
| Tendsile strengh at break | (MPa) | TD MD / TD - 40/32 | D 882 |
| Ultimate elongation | (%) | MD/TD - 680/780 | D 882 |
| 2% Secant modulus | (MPa) | MD/TD - 200/240 | D 882 |
| Haze | (%) | .... - 21 | D 1003 |
| Gloss 45o | ..... | .... - 38 | D 2457 |
| @ 25 micron film obtained on Collin 25, B.u.R 2.5 : I ,Temp . profile 155 -> 190 c | |||
| Recommended processing conditions | |||
| Melt temperature | (c) | 190 - 230 | |
| Blow up ratio | 2.0 - 3.0 | ||
| Die Gap | (mm) | 2.0 - 2.5 | |
| Thickness | (micron) | 15 - 150 | |
