Marun-V30G
Marun-V30G
1 product description
V 30 G is a polypropylene homopolymer with good flow
properties for injection moulding and compounding
applications.
V 30 G offers a medium-high fluidity, easy mould filling
and short cycle times. The final items moulded with V 30
G exhibit good dimensional stability and high stiffness.
The product is well suited for the production of thin-walled
articles and articles with long flow paths such as containers,
boxes, caps, closures, household articles and toys.
V 30 G is also an excellent polymer base for compounding
and master batches.
2 applications
- Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted
- ISO test methods are the !ates under the societys current procedures. All specimens are prepared by injection moulding
| PROPERTIES | method | unit | TYPICAL VALUE (a) |
| Physical properties Melt flow rate (230°G, 2.16 kg) Density |
ISO 1133 ISO 1183 |
Dg / min g/cm3 |
16 0.9 |
| Mechanical properties Flexural modulus Tensile strength yield Elongation at yield IZOD impact strenghh (notched) at 23"C Hardness Shore D |
ISO 178 ISO R 527 ISO R 527 ISO 180 ISO 868 |
N/mm7 N/mm2 % kJ/m2 Points |
1550 35 13 3 72 |
| Thermal properties Vicat softening point (9.8 N) H.D.T. (0.46 Mpa) Accelerated oven ageing in air (forced circulation) at 150 °C |
ISO 306/A ISO 75/B IS04577 |
oc oc hours |
155 117 360 |
