Marun-T30G
Marun-T30G
License Grade Code HD 7255(THE)
1 product description
T 30 G is a polypropylene homopolymerfor injection moulding
applications.
T 30 G combines high stiffness and fairiy good impact
strength with good processability. The grade is suitable for
a wide range of applications such as housewares, caps,
closures, small containers, toys, parts for small appliances
and components for the automotive industry .
2 applications
- Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
- ISO test methods are the !ates under the societys current procedures. All specimens are prepared by injection moulding .
| PROPERTIES | method | unit | TYPICAL VALUE (a) |
| Physical properties Melt flow rate (230°G, 2.16 kg) Density |
ISO 1133 ISO 1183 |
Dg / min g/cm3 |
3.2 0.9 |
| Mechanical properties Flexural modulus Tensile strength yield Elongation at yield IZOD impact strenghh {notched)at 23 °C Hardness Shore D |
ISO 178 ISO R 527 ISO R 527 ISO 180 ISO 868 |
N/mm7 N/mm2 % kJ/m2 Points |
1450 3 13 5 71 |
| Thermal properties Vicat softening point (9.8 N) H.D.T. (0.46 Mpa) Accelerated oven ageing in air (forced circulation) at 150 °C |
ISO 306/A ISO 75/B IS04577 |
oc oc hour |
155 110 360 |
