Marun-C30S
Marun-C30S
1 product description
C 30 S is a polypropylene homopolymer with a good flow
properties and is particularly suitable for the extrusion of film
yam, monofilament, cast film and sheet.
C 30 S combines
outstanding process ability with good mechanical properties.
C 30 S is particularly suitable to produce film yam with the
cast film process.
Film yam of C 30 S is used for baler
twines, packaging twines and ropes.
C 30 S is well suited for the production of monofilament used for
instance in brush and broom filling and technical applications.
Other applications of C 30 Sare monolayer or coextruded
film for packaging, thin sheet for stationery folders and
sheet for thermoforming.
C 30 S is also used for the extrusion of straws
2 applications
- Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
- ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.
| PROPERTIES | method | unit | TYPICAL VALUE (a) |
| Physical properties Melt flow rate (230'C, 2.16 kg) Density |
ISO 1133 ISO 1183 |
dg / min g/cm3 |
6 0.9 |
| Mechanical properties Flexural modulus Tensile strength yield Elongation at yield lzod impact strenghh (notched) at 23 °C Hardness Shore D |
ISO 178 ISO R527 ISO R 527 ISO 180 ISO 868 |
N/mm2 N/mm2 % kJ/m2 points |
1500 34 13 4 71 |
| Thermal properties Vicat softening point (9.8 N) H.D.T. (0.46 Mpa) Accelerated oven ageing in air (forced circulation) at 150 °C |
ISO 306/A ISO 75/B IS04577 |
oc oc hour |
155 112 360 |
